Chemical equipment: Coulomat 702 SO/CS

Coulomat 702 SO/CS

Description:
This coulometric method is not limited in its range and can be used to analyse both small ppm values and very high carbon contents in the percent range. Coulometric carbon analysis involves no calibration and represents a reference method in metal analysis. As an absolute procedure without any calibration this instrument can be used for checking other analytical methods which require calibration. The modular construction permits easy change of furnace for use in environmental monitoring (TC, TIC, TOC, Diesel smoke etc.).

Technical details:
Coulomat 702 SO/CS Determination of carbon (and sulphur) in metals, organic and inorganic solids.
Furnace Slit heated resistance type, both sides open-end, combustion at atmospheric pressure, continuous adjustable temperature, oxygen purificationreagent tube, flow indicators, 230 V, 50 Hz, 3 kVA.
Analyser Gas flow system, two thermostatised electrolysis cells, detector zero-point and signal indicator, oxygen purification reagent tube, pressure indicator, membrane and oil pump, 230 V, 50 Hz, 350 kVA.
Applications Catalysts, cement, ceramics, coal, coke, ferrous metals, slag, steel, refractories, metal alloys, glass,...
Range 0.001 - 100 % C
Reproducibility about 0.5 % relative
Resolution 0.1 ppm
Analysis time 120 to 300 sec
Sample weight 10 mg to 1 g
Crucible Ceramic boat
Method Combustion in oxygen, detection of released CO₂
Detection method Coulometric (pH change)
Gas Oxygen, 99.5 % (1.5 bar)
Oxygen, 99.995 % (1.5 bar) for C < 50 ppm
Flow 2.5 l/min approx. during analysis, switch off during stand-by
Temperature up to 1350 °C

Room: 01.29

More Technical information: Techinfo@mtm.kuleuven.be


Technical details:
Coulomat 702 SO/CS	Determination of carbon (and sulphur) in metals, organic and inorganic solids.
Furnace	Slit heated resistance type, both sides open-end, combustion at atmospheric pressure, continuous adjustable temperature, oxygen purificationreagent tube, flow indicators, 230 V, 50 Hz, 3 kVA.
Analyser	Gas flow system, two thermostatised electrolysis cells, detector zero-point and signal indicator, oxygen purification reagent tube, pressure indicator, membrane and oil pump, 230 V, 50 Hz, 350 kVA.
Applications	Catalysts, cement, ceramics, coal, coke, ferrous metals, slag, steel, refractories, metal alloys, glass,...
Range	0.001 - 100 % C
Reproducibility	about 0.5 % relative
Resolution	0.1 ppm
Analysis time	120 to 300 sec
Sample weight	10 mg to 1 g
Crucible	Ceramic boat
Method	Combustion in oxygen, detection of released CO₂
Detection method	Coulometric (pH change)
Gas	Oxygen, 99.5 % (1.5 bar) Oxygen, 99.995 % (1.5 bar) for C < 50 ppm
Flow	2.5 l/min approx. during analysis, switch off during stand-by
Temperature	up to 1350 °C